use serde::{Deserialize, Serialize};

#[derive(Debug, Default, Serialize, Clone)]
pub enum PrintStatus {
    #[default]
    Unknown,
    Prepare,
    Idle,
    Printing,
    Paused,
    Finished,
    Stopped,
    Error,
    Attention,
    Busy,
}

pub trait UpdateFrom<T> {
    fn update_from(&mut self, source: &T);
}

#[derive(Debug, Default, Serialize, Clone)]
pub struct PrinterState {
    pub status: PrintStatus,
    pub bed_temp: f32,
    pub target_bed_temp: f32,
    pub nozzle_temp: f32,
    pub target_nozzle_temp: f32,
    pub axis_x: f32,
    pub axis_y: f32,
    pub axis_z: f32,
    pub flow: u32,
    pub speed: u32,
    pub fan_hotend: u32,
    pub fan_print: u32,
    pub progress: f32,
    pub time_remaining: u32,
    pub time_printing: u32,
    pub layer_num: u32,
    pub total_layer_num: u32,
    pub print_speed: Option<String>,
}

#[derive(Debug, Deserialize)]
#[serde(rename_all = "SCREAMING_SNAKE_CASE")]
enum PrusaState {
    Idle,
    Printing,
    Paused,
    Finished,
    Stopped,
    Error,
    Attention,
    Busy,
}

#[derive(Debug, Deserialize)]
#[serde(rename_all = "SCREAMING_SNAKE_CASE")]
enum BambuState {
    Prepare,
    Idle,
    Running,
    Pause,
    Finish,
    Failed,
}

#[derive(Debug, Deserialize)]
struct PrusaJob {
    progress: f32,
    time_remaining: u32,
    time_printing: u32,
}

#[derive(Debug, Deserialize)]
struct PrusaPrinterInfo {
    state: PrusaState,
    temp_nozzle: f32,
    target_nozzle: f32,
    temp_bed: f32,
    target_bed: f32,
    axis_x: f32,
    axis_y: f32,
    axis_z: f32,
    flow: u32,
    speed: u32,
    fan_hotend: u32,
    fan_print: u32,
}

#[derive(Debug, Deserialize)]
pub struct PrusaStatus {
    job: Option<PrusaJob>,
    printer: PrusaPrinterInfo,
}

impl UpdateFrom<PrusaStatus> for PrinterState {
    fn update_from(&mut self, status: &PrusaStatus) {
        self.status = match status.printer.state {
            PrusaState::Idle => PrintStatus::Idle,
            PrusaState::Printing => PrintStatus::Printing,
            PrusaState::Paused => PrintStatus::Paused,
            PrusaState::Finished => PrintStatus::Finished,
            PrusaState::Stopped => PrintStatus::Stopped,
            PrusaState::Error => PrintStatus::Error,
            PrusaState::Attention => PrintStatus::Attention,
            PrusaState::Busy => PrintStatus::Busy,
        };
        let p = &status.printer;
        self.bed_temp = p.temp_bed;
        self.target_bed_temp = p.target_bed;
        self.nozzle_temp = p.temp_nozzle;
        self.target_nozzle_temp = p.target_nozzle;
        self.axis_x = p.axis_x;
        self.axis_y = p.axis_y;
        self.axis_z = p.axis_z;
        self.flow = p.flow;
        self.speed = p.speed;
        self.fan_hotend = p.fan_hotend;
        self.fan_print = p.fan_print;
        if let Some(job) = &status.job {
            self.progress = job.progress;
            self.time_remaining = job.time_remaining;
            self.time_printing = job.time_printing;
        }
    }
}

#[derive(Debug, Deserialize)]
struct BambuPrintMessage {
    bed_target_temper: Option<f32>,
    bed_temper: Option<f32>,
    gcode_state: Option<BambuState>,
    layer_num: Option<u32>,
    mc_percent: Option<u32>,
    mc_remaining_time: Option<u32>,
    nozzle_target_temper: Option<f32>,
    nozzle_temper: Option<f32>,
    print_speed: Option<String>,
    total_layer_num: Option<u32>,
}

#[derive(Debug, Deserialize)]
pub struct BambuStatus {
    print: Option<BambuPrintMessage>,
}

impl UpdateFrom<BambuStatus> for PrinterState {
    fn update_from(&mut self, status: &BambuStatus) {
        if let Some(print) = &status.print {
            if let Some(v) = print.bed_temper {
                self.bed_temp = v;
            }
            if let Some(v) = print.bed_target_temper {
                self.target_bed_temp = v;
            }
            if let Some(v) = print.nozzle_temper {
                self.nozzle_temp = v;
            }
            if let Some(v) = print.nozzle_target_temper {
                self.target_nozzle_temp = v;
            }
            if let Some(v) = print.mc_percent {
                self.progress = v as f32;
            }
            if let Some(v) = print.mc_remaining_time {
                self.time_remaining = v;
            }
            if let Some(v) = print.layer_num {
                self.layer_num = v;
            }
            if let Some(v) = print.total_layer_num {
                self.total_layer_num = v;
            }
            self.print_speed = print.print_speed.clone();
            if let Some(gcode_state) = &print.gcode_state {
                self.status = match gcode_state {
                    BambuState::Prepare => PrintStatus::Prepare,
                    BambuState::Idle => PrintStatus::Idle,
                    BambuState::Running => PrintStatus::Printing,
                    BambuState::Pause => PrintStatus::Paused,
                    BambuState::Finish => PrintStatus::Finished,
                    BambuState::Failed => PrintStatus::Error,
                };
            }
        }
    }
}

#[derive(Debug, Deserialize)]
pub struct Config {
    // This allows you to have a list of different printer types
    pub printers: Vec<Printer>,
}

impl Config {
    pub fn load(toml: &str) -> Result<Config, toml::de::Error> {
        toml::from_str(toml)
    }
}

#[derive(Debug, Deserialize)]
#[serde(tag = "type", rename_all = "lowercase")]
pub enum Printer {
    Prusa {
        name: String,
        host: String,
        api_key: String,
    },
    Bambu {
        name: String,
        host: String,
        access_code: String,
        serial_number: String,
    },
}